News

Sealant material for building a house

Fill the screw head with acrylic filler (wall putty). Build a house that is strong and resistant to water. For internal and external work, suitable for filling, puttying, fiber cement materials such as boards and fiber cement boards. For work putty, screw heads and small cracks not exceeding 2.0 mm.

Note : Read more articles about building a house at trendyhome.co.th

***Caution Gypsum powder should not be used. Fiber cement screw head putty because it is not resistant to water and moisture.

Acrylic sealant material 302 is suitable for plastering cracks larger than 2 -10 mm.

how it works

  • Use acrylic sealant 302 to fill the groove. to be smooth leave until dry
  • and top it with acrylic filler, repeat 1 more round
  • *** acrylic sealant 302 acts as a sealant. can not be polished

Gypsum powder and plaster joints Gypsum board is suitable for screw head filling and smooth plastering joints, ceiling, wall, gypsum board.

Putty work, screw head, home builders often know that they should use a trowel Embossing after screw shooting, Flatten it before grouting the screw head.

Fill the heads of fiber cement board screws with acrylic filler and leave to dry. and polished to make it smooth sanding machine Use with 80 grit sandpaper or 3 grit sandpaper.

***For fiber cement work, the word “screw head grout” should be used. It should not be putty in a wide area because acrylic filler, when dry, will be difficult to polish. will make the surface not as smooth as it should be

Filling the heads of fiber cement wood screws with acrylic filler, leave to dry and Polished to smooth. sanding machine Use with 80 grit sandpaper or 3 grit sandpaper.

***For fiber cement work, the term “screw head grout” should be used. It should not be putty in a wide area because acrylic filler is difficult to polish when dry. will make the surface not as smooth as it should be

Filling the head of wood screws with fiber cement Water-based translucent wood stain to show the pattern with acrylic flier. Cover only the screw head. Use a damp cloth. wipe off excess

***Caution

  • Fill only the screw head, use your fingers to trim and wipe off the excess. should not be spread widely
  • Special grout for joints only. and check out the excess

***Do not polish the acrylic filler with sandpaper.

Precautions for Putty, Screw Head, Sealant

Examples of grouting only wood joints and polished to make it smooth, not putty the joint

Examples of grouting only wood joints and polished to make it smooth, not putty the joint

For example, the putty for joints is wide, and gypsum powder is used for interior work as the wrong type of filler. When it hits the water, it slips away.

For example, plug the screw head overflowing to the side. Sealant overflows to the side. did not wipe it out as a cause When painted with a translucent formula of wood dye, it doesn’t come out beautiful.

Examples of woodworking in the area to fill the head of the screw Emphasis on meticulous work Interior/exterior flooring

For example, woodwork where the screw head is not covered. Paint over wood stains for exterior work.

Sealant material

Sealants, also known as sealants, are used to seal the joints between different materials. They can be divided into 3 types.

Acrylic sealant, not very flexible grout. Easy to decorate when not yet dry A damp cloth can be used to wipe. But when it hardens and will not dissolve in water

  • The advantage is to cover the scratches, polish the work surface. and can be painted over, cheaper than other types of grout
  • Price 30-100 baht per tube, depending on the quality and properties of the material.

 Suitable for cement-fiber cement joints. Exterior door and window frames that collide with the fiber cement wood that needs to be painted over.

Silicone sealant is a highly flexible sealant. Versatile Both outside and inside the building have high adhesion strength. There is a limitation of not being able to paint.

  • The advantage is water resistance and good waterproofing. There are many colors to choose from.
  • Price per tube 80-150 baht, depending on the quality and properties of the material such as durability, flexibility, UV light resistance or mold protection.
  • General silicone for glass sealant. door frame interior
  • Anti-UV silicone for sealant of door, window frame, roof, exterior isoval wall.
  • Anti-fungal silicone for sanitary ware grout in bathrooms, bathroom tiles, countertops, kitchens that have a chance to come in contact with water frequently.

Polyurethane sealant, a grout with high flexibility, high durability, can be painted over. House building work. Three devils can use polyurethane both inside and outside the building. Use sealant to seal the joints between the building’s structure. Concrete floor joints, ceiling joints, walls, fiber cement board floors.

  • Price per tube 200-300 baht, depending on the quality and properties of the material.
  • The limitation is that it dries slowly and must be left for 3-4 days before it can be painted over. Highest price of all Sealant types.

Related Articles

Leave a Reply

Back to top button